My Echo Flask™ is not building pressure!

No need to worry—let’s get your flask building pressure again with these easy steps:

1. Check the Lid Alignment

   • Ensure the lid is secured properly with the logo positioned completely perpendicular or horizontally.
   • If the lid isn’t aligned correctly, pressure will not build during the cycle, and it will not release properly.

Here's a quick demonstration on how to remove the lid (Time 2:32), take out the gasket/seal (Time 0:39), properly reinsert it (Time 1:04), and then how to put the lid back on (Time 2:18).

1. Inspect the Gasket

   • Carefully remove the gasket from the lid. Sometimes, the gasket can stick together, which stops pressure from building.
   • Clean the gasket thoroughly to ensure it’s free from debris and not stuck before reinserting it.
   • When putting it back into the lid, be sure to insert it with the indented side facing in.

2. Run and Test

   • Start a cycle and hold down the pressure release button for 30 seconds. If needed, repeat this step a few times.
   • This process often helps the gasket lock and seal correctly, allowing your flask to build and release pressure as intended.

3. Still Having Trouble?

   • If you find you have to continuously hold down the pressure release for it to work, that's no problem! Let us know, and we’ll be happy to send you a new lid.