Each Whole Home Filter Specifications Overview Each Whole Home Filter Specifications Overview

Each Whole Home Filter Specifications Overview

20 Micron Carbon Block Filter

Specification Details
Filter Type 20 Micron Carbon Block Filter
Micron Ratings
20 Micron: Chlorine, Pesticides, Herbicides, Tastes & Odors
Tank Dimensions 8" Diameter x 40" Height
Peak Flow Rate 30 gallons per minute (gpm)
Estimated Treatment Capacity >150,000 gallons
Filter Replacement Replacement needed about 1 every year
Chlorine Reduction Greater than 90% (based on 2 ppm of free chlorine)
Carbon Media Made with NSF/ANSI Standard 61 Certified and California Prop 65 Compliant coconut shell carbon
Performance Certification Certified to NSF/ANSI Standard 53 for reduction of contaminants
Test Results Water entering the system was reduced to levels at or below NSF-permitted limits

3 Micron Carbon Block Filter:

Specification Details
Filter Type 3 Micron Carbon Block
Micron Ratings 3 Micron: Chloramine, Chlorine, Pesticides, Herbicides, Tastes & Odors
Tank Dimensions 8" Diameter x 40" Height
Peak Flow Rate 25 gallons per minute (GPM)
Contaminant Reduction Greater than 85% contaminant reduction (estimated capacity)
Estimated Treatment Capacity >50,000 gallons (189,271 liters)
Filter Replacement Replacement needed about 1 every year
Carbon Media Made with NSF/ANSI Standard 61 Certified and California Prop 65 Compliant coconut shell carbon and raw materials
Performance Certification Tested and certified according to NSF/ANSI Standard 53 for the reduction of contaminants. Water output is below NSF-permitted contaminant levels.

50/20 Micron Double Pleated

Specification Details
Filter Type 50/20 Micron Dual Gradient Double Pleated Cartridge
Micron Ratings 50 Micron: Captures visible dirt, rust flakes, sand, sediment
20 Micron: Captures fine sand, silt, and sediment that passes through the 50-micron layer
Tank Dimensions 8" Diameter x 40" Height
Peak Flow Rate 30 gallons per minute (GPM)
Filter Replacement

Replacement needed about 1.5-2 years

Extended Service Life: 6, 12, 18, or 24 months (compared to standard 1–3 month filters)

Total Surface Area Approximately 100 ft²
Surface Area Comparison ~6.5x more than standard 4.5" x 20" filters (16 ft²)
~14.5x more than standard 2.5" x 20" filters (7 ft²)
Performance Benefit More open surface area = longer service life and greater contaminant capacity
Carbon Media Made with NSF/ANSI Standard 61 Certified and California Prop 65 Compliant coconut shell carbon and raw materials
Performance Certification Tested and certified to NSF/ANSI Standard 53 for the reduction of contaminants. Water entering the system was reduced to levels at or below NSF-permitted limits

0.5 Micron Carbon Block Filter:

Specification Details
Filter Type 0.5 Micron Carbon Block
Micron Rating 0.5 Micron – Filters: Chloramine, Chlorine, Lead, PFAS (PFOA/PFOS), Pesticides, Herbicides, Tastes & Odors
Tank Dimensions 8" Diameter x 40" Height
Peak Flow Rate 8 GPM
Filter Replacement Replacement needed about every 1 year
Lead Removal Capacity >88,000 gallons at 8 GPM
Pressure Drop Specification 9 psid @ 4.51 GPM
Contaminant Reductions - Lead: 99.62% reduction (NSF/ANSI Standard 53)
- PFOA/PFOS: 97.9% reduction (NSF/ANSI Standard 53)
- Cysts: 99.95% reduction (NSF/ANSI Standard 53)
Certifications & Material Safety Made with NSF/ANSI Standard 61 Certified and California Prop 65 Compliant coconut shell carbon and raw materials
Performance Certification Tested and certified according to NSF/ANSI Standard 53. Water output meets or exceeds NSF-permitted contaminant limits.

Fluoride Filter:

Specification Details
Filter Type Fluoride Filter (Multi-Media Compatible)
Tank Dimensions 8" Diameter x 40" Height
Construction Material Durable Polyethylene
Filter Replacement Replacement needed about every 1 year
Seal Type Double Buna-N O-ring seals for secure, leak-free performance
O-Ring Positioning Positioned at the bottom for enhanced stability
Flow Design Mid-Vortech® distributor plate for optimized flow
Top Cap Options Available with locking or removable top cap
Flow Type Support Supports both upflow and downflow service for full bed utilization
Bypass Prevention No contaminant bypass – secure double O-ring sealing
Performance Benefits - Taste & Odor Reduction (chlorine, chloramines)
- High flow rate with low pressure drop
Compatibility Multi-media compatible – ideal for separation/support of filtration media
Certifications & Material Safety Made with NSF/ANSI Standard 61 Certified and California Prop 65 Compliant coconut shell carbon and raw materials
Performance Certification Certified under NSF/ANSI Standard 53 for contaminant reduction. Water output meets or exceeds NSF-permitted limits.

Water Softener System – Product Specifications

Specification Details
Flow Rate 14 gallons per minute (gpm)
System Type Water Softener
Pressure Vessel Dimensions 54” (H) x 13” (Diameter)
Overall System Height 62”
Required Installation Space 14” (D) x 25” (W) x 62” (H)
System Weight 145 lbs
Brine Tank Dimensions 15” (L) x 17” (W) x 36” (H)
Media Replacement ~ every 20 years
Maximum System Capacity 50,000 grains
Max Salt Usage per Cleaning Cycle 22 lbs

Water Conditioner System – Product Specifications

Specification Details
Flow Rate 30 gallons per minute (gpm)
System Type Water Conditioner
Tank Dimensions 8" Diameter x 40" Height
Media Replacement ~ every 5 years
Maximum System Capacity 50,000 grains

 

Add comment

Please sign in to leave a comment.