Replacing the External Filters:
- Remove the plugs from the external filter by pushing down on the locking ring and pull the plug out.
- Turn off the main source of water.
- Remove the old filter from the water line by pushing down on the locking rings and pulling out the water line from both sides of the filter.
- Look for the flow arrow on the external filter and make sure the arrows face towards the machine.
- Push the main water line into each end of the external filter.
- Turn the main source water back on.
- Observe for any leaks.
External Filter Instructional Video- https://www.youtube.com/watch?v=Rs96QK9vwXI
0
0
Was this article helpful?
0 out of 0 found this helpful
Articles in this section
- How to Replace External Filter on the Ultimate
- How to Replace External Filter on the H2 Machine
- What type of generator do your machines use?
- Can I hook up the H2 Machine over the counter but not hook it up with my faucet and instead from the waterline under my sink?
- What is the Flow Rate for the Echo Flow (formerly Echo H2 Server)?
- Does the Echo H2 Machine come with a filtration system?
- Do I need a Diverter Valve for the Echo H2 Machine?
- Do I need an Echo H2 Faucet with the Echo H2 Machine?
- How often should I clean the H2 Machine?
- How to Tighten the Knob on the Echo H2 Machine
Add comment
Please sign in to leave a comment.