How do I change the cycle time on the Echo Flask™?

The Echo Flask™ makes it easy to customize your hydrogen cycle based on your preferences.

By default, the Flask is set to a 10-minute cycle, but you can easily increase or decrease the cycle time up to 20 minutes (max) to suit your preferences. As you adjust the cycle length, the display updates to show the estimated PPM (parts per million) associated with that selected duration.

Always release the pressure in your Echo Flask prior to running back-to-back cycles to avoid damage to your flask.

Please note: The displayed PPM is not a real-time measurement of the hydrogen concentration in your water. It is an estimate based solely on the selected cycle time. Actual dissolved hydrogen levels may vary depending on factors such as water quality, temperature, mineral content, altitude, and other environmental conditions.
 

How to Adjust the Cycle Time

1. Wake the display
   • Tap the touchscreen to turn on the display.
2. Unlock the screen
   • Swipe up to unlock the interface.
3. Start a hydrogen cycle
   • Press the Play button to begin the default 10-minute cycle.
     

4. Adjust the cycle length

   • Press the "+" button to increase the cycle time.
   • Press the "–" button to decrease the cycle time.
     

   As you adjust the duration, the display will automatically update the estimated PPM concentration for the selected cycle time.

Auto-Lock Feature

If no buttons are pressed for approximately 3 seconds, the display will automatically lock. Simply swipe up again to unlock the screen and continue making adjustments.

Tip: Longer cycle times generally produce a higher estimated hydrogen concentration (PPM), allowing you to customize your water based on your preferences.